Meet the custom Royal Enfield Hunter 350 flat tracker
Has undergone mechanical and cosmetic tweaks
Custom-built by a Thailand-based workshop
Retains the 349cc engine
If there’s one model that bike modders love, it’s Royal Enfield. With a blank canvas to work on, a modder can get his vision down on a Royal Enfield and find yourself with a novel bike. Royal Enfield bikes are very pleasant to work on and change to extract totally different characters.
One such modder, Okeasyshop, created a radical-looking Street Tracker bike based mostly on a newly launched Hunter 350. It gets a very totally different face and looks a lot like an actual Street Tracker bike that Royal Enfield would have made. Let’s have a look.
Checkout Also : Royal Enfield Himalayan 3 New Colors
Hunter 350 Street Tracker
Street Tracker bikes are those which can be track racers with simply sufficient equipment on them to pass the regulations and be classified as street-legal bikes. Flat track racers are these bikes that take place on an unpaved track.
This track is normally oval in shape and flat track racers don’t come with front brakes so racers might steer their vehicle with rear wheels. Street Trackers come with front brakes, although. To convert a stock Royal Enfield Hunter 350 right into a street-legal Street Tracker, Okeasyshop has integrated a whole lot of modifications.
For starters, the headlight assembly is totally removed to incorporate a flat panel with some LEDs in them just to pass off as headlights. The LEDs are stacked vertically into two clusters that give the bike an alienist look. With the removal of headlight assembly, speedo is gone as nicely. It’s shifted under the fuel tank towards its left facing upwards.
That is done to keep the Hunter 350 Street Tracker appears to be like with out skimping on regulations. The stock handlebar is replaced by a taller one and front telescopic forks are replaced with USD forks completed in a golden shade. Viewing it from the right reveals a fantastically executed custom exhaust that is upswept in its design.
Custom Rear Subframe
Different changes noticed are Nissin calipers to drop anchor better, a custom single-seat layout and a particularly minimal and tidy tail part. To mount this single-seat, Okeasyshop has modified the frame to have a bolt-on rear subframe. A custom rear subframe allowed the modder to additionally incorporate a monoshock as a substitute of a dual shock absorber setup on a stock bike.
With a free-flowing exhaust, Hunter 350 Street Tracker customized bike is likely to perform a tad brisker than stock bike owing to weight savings. Stock Hunter 350 makes 20.2 bhp and 27 Nm of torque from its 349cc engine. This mod was based mostly on Hunter Metro variant and therefore comes with alloy wheels. With around 15 new bikes brewing in Royal Enfield’s labs, should they consider incorporating a Street Tracker as nicely? Maybe.
#Hunter #Street #Tracker #Custom #Motorcycle #Alienist
Meet the custom Royal Enfield Hunter 350 flat tracker
Has undergone mechanical and cosmetic tweaks
Custom-built by a Thailand-based workshop
Retains the 349cc engine
If there’s one model that bike modders love, it’s Royal Enfield. With a blank canvas to work on, a modder can get his vision down on a Royal Enfield and find yourself with a novel bike. Royal Enfield bikes are very pleasant to work on and change to extract totally different characters.
One such modder, Okeasyshop, created a radical-looking Street Tracker bike based mostly on a newly launched Hunter 350. It gets a very totally different face and looks a lot like an actual Street Tracker bike that Royal Enfield would have made. Let’s have a look.
Checkout Also : Royal Enfield Himalayan 3 New Colors
Hunter 350 Street Tracker
Street Tracker bikes are those which can be track racers with simply sufficient equipment on them to pass the regulations and be classified as street-legal bikes. Flat track racers are these bikes that take place on an unpaved track.
This track is normally oval in shape and flat track racers don’t come with front brakes so racers might steer their vehicle with rear wheels. Street Trackers come with front brakes, although. To convert a stock Royal Enfield Hunter 350 right into a street-legal Street Tracker, Okeasyshop has integrated a whole lot of modifications.
For starters, the headlight assembly is totally removed to incorporate a flat panel with some LEDs in them just to pass off as headlights. The LEDs are stacked vertically into two clusters that give the bike an alienist look. With the removal of headlight assembly, speedo is gone as nicely. It’s shifted under the fuel tank towards its left facing upwards.
That is done to keep the Hunter 350 Street Tracker appears to be like with out skimping on regulations. The stock handlebar is replaced by a taller one and front telescopic forks are replaced with USD forks completed in a golden shade. Viewing it from the right reveals a fantastically executed custom exhaust that is upswept in its design.
Custom Rear Subframe
Different changes noticed are Nissin calipers to drop anchor better, a custom single-seat layout and a particularly minimal and tidy tail part. To mount this single-seat, Okeasyshop has modified the frame to have a bolt-on rear subframe. A custom rear subframe allowed the modder to additionally incorporate a monoshock as a substitute of a dual shock absorber setup on a stock bike.
With a free-flowing exhaust, Hunter 350 Street Tracker customized bike is likely to perform a tad brisker than stock bike owing to weight savings. Stock Hunter 350 makes 20.2 bhp and 27 Nm of torque from its 349cc engine. This mod was based mostly on Hunter Metro variant and therefore comes with alloy wheels. With around 15 new bikes brewing in Royal Enfield’s labs, should they consider incorporating a Street Tracker as nicely? Maybe.
#Hunter #Street #Tracker #Custom #Motorcycle #Alienist
